Circular No. 13/2013/TT-BKHCN amends and supplements certain provisions of previous circulars regarding the application of National Technical Regulations in production and circulation in the market. The provisions shall take effect from 2014 to 2016.
Đối tượng áp dụng
Steel manufacturers for concrete reinforcement, liquefied petroleum gas (LPG), and household electronic appliances; state management agencies for standards, measurement, and quality; individuals using these products.
Các điểm cốt lõi
- Steel manufacturers for concrete reinforcement: Apply QCVN 7:2011/BKHCN from January 1, 2014, encouraged to apply earlier.
- LPG market: Only allowed to circulate after conformity certification from September 1, 2013.
- Household electronic appliances: Apply QCVN 9:2012/BKHCN from June 1, 2015 for devices numbered 1-2, from January 1, 2016 for devices numbered 3-7.
- Effective date of implementation is June 1, 2013.
- The Director of the Standardization, Measurement, and Quality Control General Department shall be responsible for guiding the implementation.
🌐 Tác động xã hội từ văn bản này
- Steel and LPG manufacturing enterprises must comply with new regulations, which may increase input costs.
- Consumers purchasing household electronic appliances will be protected in terms of quality starting from 2016.
- The Standardization, Measurement, and Quality Control General Department and state management agencies must strengthen inspection and supervision.
❓ Câu hỏi thường gặp
When must steel manufacturers for concrete reinforcement begin applying QCVN 7:2011/BKHCN?
As of January 1, 2014, enterprises must apply QCVN 7:2011/BKHCN.
When can LPG be permitted to circulate in the market?
As of September 1, 2013, LPG can only circulate after obtaining conformity certification and announcement according to QCVN 8:2012/BKHCN.
From which number do household electronic appliances start applying QCVN 9:2012/BKHCN?
As of June 1, 2015, household electronic appliances numbered 1-2 must apply QCVN 9:2012/BKHCN.
When do the new regulations come into effect?
This Circular takes effect from June 1, 2013.
What responsibilities does the Standardization, Measurement, and Quality Control General Department have?
The Director of the Standardization, Measurement, and Quality Control General Department shall be responsible for guiding and organizing the implementation of this Circular.
Toàn văn
CIRCULAR
Regarding amendments and supplements to certain articles of Circular No. 21/2011/TT-BKHCN, Circular No. 10/2012/TT-BKHCN, and Circular No. 11/2012/TT-BKHCN
The Minister of Science and Technology issues this Circular amending and supplementing certain articles of Circular No. 21/2011/TT-BKHCN dated September 22, 2011 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Reinforcing Steel for Concrete", Circular No. 10/2012/TT-BKHCN dated April 12, 2012 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Liquefied Petroleum Gas" and Circular No. 11/2012/TT-BKHCN dated April 12, 2012 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Electromagnetic Compatibility for Household Electrical and Electronic Equipment and Similar Purposes".
THE MINISTER OF SCIENCE AND TECHNOLOGY ISSUES THE NATIONAL TECHNICAL REGULATION TO AMEND AND SUPPLEMENT CERTAIN PROVISIONS OF THE NATIONAL TECHNICAL REGULATION QCVN 1:2009/BKHCN ON GASOLINE, DIESEL FUEL, AND BIOFUELS PROMULGATED BY DECREE NO. 20/2009/TT-BKHCN DATED SEPTEMBER 30, 2009 OF THE MINISTER OF SCIENCE AND TECHNOLOGY.
_______________
Pursuant to the Law on Standards and Technical Regulations dated June 29, 2006;
Based on Decree No. 132/2008/NĐ-CP dated December 31, 2008 of the Government detailing implementation of certain provisions
Pursuant to Decree No. 20/2013/NĐ-CP dated February 26, 2013 of the Government stipulating the functions, tasks, powers, and organizational structure of the Ministry of Science and Technology;
Considering the proposal of the Director General of the Standardization, Measurement, and Quality Control Department,
Article 1. Amend and supplement Article 3 of Circular No. 21/2011/TT-BKHCN dated September 22, 2011 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Reinforcing Steel for Concrete (QCVN 7:2011/BKHCN)" as follows:
"Article 3
1. For reinforcing steel produced domestically and imported:
a) In cases where the provisions of QCVN 7:2011/BKHCN have been applied, such provisions shall continue to be applied.
b) In cases where the provisions of QCVN 7:2011/BKHCN have not yet been applied, such provisions must be applied from January 1, 2014.
It is encouraged that domestic production enterprises and importers of reinforcing steel apply the provisions of QCVN 7:2011/BKHCN before January 1, 2014.
2. For reinforcing steel circulating in the market:
From June 1, 2014, products of reinforcing steel circulating in the market must comply with the provisions of QCVN 7:2011/BKHCN."
Amend Article 3 of Circular No. 10/2012/TT-BKHCN dated April 12, 2012 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Liquefied Petroleum Gas (QCVN 8:2012/BKHCN)" as follows:
Article 3. Amend Article 3 of Circular No. 11/2012/TT-BKHCN dated April 12, 2012 of the Minister of Science and Technology on the issuance of "National Technical Regulations on Electromagnetic Compatibility for Household Electrical and Electronic Equipment and Similar Purposes (QCVN 9:2012/BKHCN)" as follows:
"Article 3. From June 1, 2015, electrical and electronic equipment from Item 1 to Item 2 of Appendix QCVN 9:2012/BKHCN must comply with the provisions of these national technical regulations.
From January 1, 2016, electrical and electronic equipment from Item 3 to Item 7 of Appendix QCVN 9:2012/BKHCN must comply with the provisions of these national technical regulations."
This Circular takes effect from June 1, 2013.
Article 4. Implementation provisions
1. The Director of the General Department of Standardization, Metrology and Quality Control is responsible for guiding and organizing the implementation of this Circular.
Article 5. Responsibilities for Implementation
2. Heads of agencies, organizations, enterprises, and individuals related to this matter are responsible for implementing this Circular.
2. The heads of agencies, organizations, enterprises, and individuals related thereto shall be responsible for implementing this Circular.
|
DEPUTY MINISTER
DEPUTY MINISTER
(Signed)
Tran Viet Thanh
|
Văn bản gốc (PDF)
Bản đồ quan hệ
Bấm vào một văn bản để mở. Viền đỏ = quan hệ làm thay đổi hiệu lực.
Bản dịch
Văn bản này có sẵn ở các ngôn ngữ sau: