Decision No. 18/2007/QĐ-BKHCN of the Ministry of Science and Technology promulgates Regulations on uniforms, insignia, rank badges, and nameplates for Science and Technology Inspectors. The Decision takes effect fifteen days after its publication in the Official Gazette.
Scope of application
Science and Technology Inspector
Key points
- Science and Technology Inspector → shall use uniforms, insignia, rank badges, and nameplates in accordance with the regulations of the Ministry of Science and Technology.
🌐 Social impact of this document
- Positive impact: Ensures professionalism and recognizability for Science and Technology Inspectors, enhancing the effectiveness of inspection activities.
- Negative impact: No significant impact on citizens/businesses/society.
❓ Frequently asked questions
How will Science and Technology Inspectors use uniforms?
Science and Technology Inspectors will use uniforms in accordance with the regulations of the Ministry of Science and Technology, specifically the Regulations on uniforms, insignia, rank badges, and nameplates issued by this Decision.
When does this Decision take effect?
This Decision takes effect fifteen days after its publication in the Official Gazette.
How will relevant units be responsible for implementing this Decision?
The Science and Technology Inspection Agency and related units of the Ministry of Science and Technology, as well as Provincial Departments of Science and Technology under centrally governed cities, are responsible for implementing this Decision.
To whom does this Decision apply?
This Decision applies only to Science and Technology Inspectors.
Will there be penalties if the regulations on uniforms, insignia, rank badges, and nameplates are not followed?
The document does not provide information regarding sanctions for violations of the regulations on uniforms, insignia, rank badges, and nameplates for Science and Technology Inspectors.
Full text
Pursuant to …;
REGARDING THE ISSUE OF REGULATIONS ON UNIFORMS, BADGES, RANK BADGES, AND NAMEPLATES FOR SCIENCE AND TECHNOLOGY INSPECTORS
________________________________
BỘ TRƯỞNG BỘ KHOA HỌC VÀ CÔNG NGHỆ
BASED ON THE INSPECTION LAW NO. 22/2004/QH11 dated June 15, 2004;
BASED ON THE GOVERNMENT DECREE NO. 54/2003/NĐ-CP dated May 19, 2003, which stipulates the functions, tasks, powers, and organizational structure of the Ministry of Science and Technology, and the Government Decree No. 28/2004/NĐ-CP dated January 16, 2004, which amends and supplements certain provisions of Decree No. 54/2003/NĐ-CP;
BASED ON THE GOVERNMENT DECREE NO. 87/2006/NĐ-CP dated August 28, 2006, on the organization and operation of Science and Technology Inspectors;
BASED ON THE GOVERNMENT DECREE NO. 100/2007/NĐ-CP dated June 13, 2007, on inspectors and inspection associates;
BASED ON THE OFFICE OF THE GOVERNMENT’S LETTER NO. 523/TTCP-VP dated March 20, 2007, regarding the agreement on regulations for inspector uniforms;
PURSUANT TO THE PROPOSAL OF THE CHIEF INSPECTOR OF THE MINISTRY OF SCIENCE AND TECHNOLOGY,
DECISION:
Article 1. ATTACHED HERETO ARE THE REGULATIONS ON UNIFORMS, BADGES, RANK BADGES, AND NAMEPLATES FOR SCIENCE AND TECHNOLOGY INSPECTORS.
Article 2. The Standard Measurement Quality Control Department shall be responsible for organizing and guiding the implementation of the Regulations adopted herein.
Article 3. THE SCIENCE AND TECHNOLOGY INSPECTION AGENCIES AND RELATED UNITS OF THE MINISTRY OF SCIENCE AND TECHNOLOGY, AS WELL AS THE DEPARTMENTS OF SCIENCE AND TECHNOLOGY OF THE PROVINCES AND MUNICIPALITIES DIRECTLY UNDER THE CENTRAL GOVERNMENT SHALL BE RESPONSIBLE FOR IMPLEMENTING THIS DECISION./.
DEPUTY MINISTER
Download
The original file of this document is being updated. Please read the full text and check back later.
Relations map
Click a document to open. A red border = a relation that changes validity.
Translations
This document is available in the following languages: