Circular No. 184/2017/TT-BQP promulgates national technical regulations on occupational safety for ground-based artillery, applicable to relevant agencies and units in military and defense from September 25, 2017.
要点
- con_hieu_luc
🌐 本文件的社会影响
更新中。
❓ 常见问题
更新中。
全文
CIRCULAR
Issuing National Technical Regulation QCVN 09:2017/BQP,
National Technical Regulation on occupational safety for ground-based artillery
Pursuant to the Law on Standards and Technical Regulations dated June 29, 2006;
Based on Decree No. 132/2008/NĐ-CP dated December 31, 2008 of the Government detailing implementation of certain provisions
Pursuant to Decree No. 35/2013/NĐ-CP dated April 22, 2013, of the Government, stipulating the functions, tasks, powers, and organizational structure of the Ministry of National Defense;
At the proposal of the Director of the Standardization - Metrology - Quality Control Department;
The Minister of National Defense issues this Circular to issue National Technical Regulation QCVN 09:2017/BQP, National Technical Regulation on occupational safety for ground-based artillery.
Article 1. QCVN 11:2018/BQP, National Technical Regulation on ammunition storage facilities, explosives, and auxiliary tools for receiving and collecting within the scope managed by the Ministry of National Defense.
QCVN 09:2017/BQP, National Technical Regulation on occupational safety for ground-based artillery.
Article 2. This Circular takes effect from September 25, 2017 and shall be uniformly applied throughout the country.
Article 3. The Director of the Standardization - Metrology - Quality Control Department, Heads of agencies and units, and individuals concerned are responsible for implementing this Circular./.
DEPUTY MINISTER
原始文件（PDF）
关系图
点击文件即可打开。红色边框＝改变效力的关系。
译本
本文件提供以下语言版本：