Circular No. 25/2018/TT-BTNMT stipulates Economic and Technical Standards for Inspection, Review, and Acceptance of Quality of Surveying and Mapping Products. This document replaces the previous Circular from 2009 and takes effect from February 1, 2019.
Đối tượng áp dụng
Ministries, ministerial-level agencies, government agencies, People's Committees of provinces and centrally governed cities, units under the Ministry of Natural Resources and Environment, Departments of Natural Resources and Environment of provinces and centrally governed cities, and related organizations and individuals.
Các điểm cốt lõi
- The Ministry of Natural Resources and Environment issues Economic and Technical Standards for Inspection, Review, and Acceptance of Quality of Surveying and Mapping Products (Article 1).
- This Circular replaces Circular No. 23/2009/TT-BTNMT from February 1, 2019 (Article 2).
- Ministries, ministerial-level agencies, government agencies, and related organizations must implement this Circular (Article 3).
- People's Committees of provinces and centrally governed cities and Departments of Natural Resources and Environment at local levels must also comply with this Circular.
- Organizations and individuals related to surveying and mapping are also subject to the provisions of this Circular.
🌐 Tác động xã hội từ văn bản này
- Establish specific regulations on inspection, review, and acceptance of quality of surveying and mapping products to improve service quality.
- Replace old regulations to facilitate stricter state management.
❓ Câu hỏi thường gặp
Which Circular does this Circular replace?
Circular No. 25/2018/TT-BTNMT replaces Circular No. 23/2009/TT-BTNMT.
When does this Circular take effect?
This Circular takes effect from February 1, 2019.
Toàn văn
CIRCULAR
Issuing Economic and Technical Standards for Inspection, Review, and Acceptance of Quality of Surveying and Mapping Products
kiểm tra, thẩm định, nghiệm thu chất lượng sản phẩm đo đạc và bản đồ ||| inspection, evaluation, acceptance of the quality of surveying and mapping products
Pursuant to the Law on Surveying and Mapping dated June 14, 2018;
On the basis of Decision No. 36/2017/NĐ-CP dated April 4, 2017, of the Government stipulating the functions, tasks, powers, and organizational structure of the Ministry of Natural Resources and Environment;
At the proposal of the Director of the Vietnam National Administration of Surveying, Mapping and Geographic Information, the Director of the Department of Planning and Finance, and the Director of the Legal Department,
The Minister of Natural Resources and Environment issues this Circular on economic and technical standards for inspection, review, and acceptance of quality of surveying and mapping products.
Article 1. Accompanying this Circular are the economic and technical standards for inspection, review, and acceptance of quality of surveying and mapping products.
Article 2. This Circular takes effect from February 1, 2019, and replaces Circular No. 23/2009/TT-BTNMT dated November 16, 2009, issued by the Minister of Natural Resources and Environment regarding economic and technical standards for inspection and acceptance of surveying and mapping products.
Article 3. Ministries, ministerial-level agencies, government-affiliated agencies, provincial People's Committees under central cities, units under the Ministry of Natural Resources and Environment, provincial Departments of Natural Resources and Environment under central cities, and related organizations and individuals are responsible for implementing this Circular./.
DEPUTY MINISTER
Bản đồ quan hệ
Bấm vào một văn bản để mở. Viền đỏ = quan hệ làm thay đổi hiệu lực.
Bản dịch
Văn bản này có sẵn ở các ngôn ngữ sau: