Circular No. 28/2024/TT-BGTVT Issuing National Technical Regulations on Vehicle Weighing Stations

Circular No. 28/2024/TT-BGTVT issuing National Technical Regulations on Vehicle Weighing Stations provides detailed technical requirements for fixed and mobile vehicle weighing stations to ensure road traffic safety. This document replaces Circular No. 09/2013/TT-BGTVT.

Số hiệu28/2024/TT-BGTVT
Loại văn bảnCircular
Cơ quan ban hànhMinistry of Construction
Người kýNguyễn Duy Lâm — Thứ trưởng
Cập nhật15/06/2026
NgànhTransport
Lĩnh vựcRoads
Ngày ban hành23/07/2024
Ngày áp dụng10/09/2024
Ngày hết hiệu lực01/01/2025
Tình trạngExpired
✦ Tóm lược thông minh

Circular No. 28/2024/TT-BGTVT issuing National Technical Regulations on Vehicle Weighing Stations provides detailed technical requirements for fixed and mobile vehicle weighing stations to ensure road traffic safety. This document replaces Circular No. 09/2013/TT-BGTVT.

Đối tượng áp dụng

Agencies, organizations, and individuals related to the management and operation of fixed and mobile vehicle weighing stations

Các điểm cốt lõi

  • Vehicle weighing stations must meet technical requirements for design, installation, and maintenance according to national technical regulation QCVN 66:2024/BGTVT (Article 1).
  • Fixed and mobile vehicle weighing stations operating before the Circular takes effect shall continue to operate until the Road Law comes into force (Article 3, Clause 3).
  • This Circular abolishes Circular No. 09/2013/TT-BGTVT on national technical regulations for vehicle weighing stations (Article 2, Clause 2).
  • This Circular takes effect from September 10, 2024 (Article 2, Clause 1).
  • Competent agencies are responsible for implementing this Circular (Article 3).

🌐 Tác động xã hội từ văn bản này

  • Enhance the effectiveness of management and control of vehicle loads, ensuring road traffic safety.
  • Old vehicle weighing stations may face difficulties in adjusting equipment to comply with new standards.
  • Citizens and transport businesses need to understand new technical requirements to avoid violations.

❓ Câu hỏi thường gặp

Which national technical regulations does Circular No. 28/2024/TT-BGTVT replace?

This Circular replaces Circular No. 09/2013/TT-BGTVT on national technical regulations for vehicle weighing stations.

When does Circular No. 28/2024/TT-BGTVT take effect?

This Circular takes effect from September 10, 2024.

How do old vehicle weighing stations operate after the Circular takes effect?

Stations operating before the Circular takes effect shall continue to operate until the Road Law comes into force.

Which agencies are responsible for implementing this Circular?

The Director of the Ministry's Office, the Inspector General of the Ministry, Heads of Departments, Directors of the Vietnam Highway Administration, and relevant agencies.

What is the number of the national technical regulation on vehicle weighing stations?

The number of the regulation is QCVN 66:2024/BGTVT.

Toàn văn

MINISTRY OF TRANSPORTATION

SOCIALIST REPUBLIC OF VIET NAM
Independence – Freedom – Happiness

NUMBER: 28/2024/TT-BGTVT
HA NOI, July 23, 2024

CIRCULAR

ISSUING NATIONAL TECHNICAL REGULATIONS ON WEIGHT STATION FOR VEHICLES

________________

 

Based on the Law on Animal Husbandry 2018;

BASED ON THE LAW ON PRODUCT QUALITY 2007;

BASED ON THE LAW ON TRAFFIC ON ROADS 2008;

BASED ON THE DECREE NO. 56/2022/ND-CP dated August 24, 2022 of THE GOVERNMENT stipulating the functions, tasks, powers, and organizational structure of THE MINISTRY OF TRANSPORT;

At the proposal of the Director of the Science, Technology, and Environment Department and the Director General of the Vietnam Highway Administration;

THE MINISTER OF TRANSPORT ISSUES THIS CIRCULAR ON NATIONAL TECHNICAL REGULATIONS ON WEIGHT STATION FOR VEHICLES.

Article 1. ATTACHED TO THIS CIRCULAR ARE THE NATIONAL TECHNICAL REGULATIONS ON WEIGHT STATION FOR VEHICLES.

REGULATION NUMBER: QCVN 66:2024/BGTVT.

Article 2. Effectiveness

1. THIS CIRCULAR SHALL TAKE EFFECT FROM SEPTEMBER 10, 2024.

2. ABOLISH CIRCULAR NO. 09/2013/TT-BGTVT DATED MAY 6, 2013 ISSUED BY THE MINISTER OF TRANSPORT ON NATIONAL TECHNICAL REGULATIONS QCVN 66:2013/BGTVT ON WEIGHT STATION FOR VEHICLES.

3. FIXED WEIGHT STATIONS AND MOBILE WEIGHT STATIONS THAT HAVE BEEN INVESTED IN AND PUT INTO OPERATION BEFORE THE EFFECTIVE DATE OF THIS CIRCULAR SHALL CONTINUE TO OPERATE UNTIL THE ROAD LAW TAKES EFFECT.

Article 3. THE HEAD OF THE MINISTRY’S OFFICE, THE HEAD OF THE MINISTRY’S INSPECTION DEPARTMENT, THE DIRECTORS OF THE DEPARTMENTS, THE DIRECTORS OF VIETNAM HIGHWAY ADMINISTRATION, VIETNAM EXPRESSWAY ADMINISTRATION, VIETNAM MOTOR VEHICLE INSPECTION ADMINISTRATION, THE HEADS OF ORGANIZATIONS AND INDIVIDUALS ASSOCIATED WITH THIS CIRCULAR ARE RESPONSIBLE FOR ITS IMPLEMENTATION./.

 

DEPUTY MINISTER
DEPUTY MINISTER
(Signed)
Nguyen Duy Lam

Văn bản gốc (PDF)

Mở PDF trong tab mới ↗