Decision No. 46/2011/QD-TTg amends and supplements the functions, tasks, powers, and organizational structure of the General Department of Standardization, Metrology, and Quality Control under the Ministry of Science and Technology. This Decision takes effect from October 15, 2011.
适用范围
The General Department of Standardization, Metrology, and Quality Control under the Ministry of Science and Technology
要点
- The Director of the General Department has the authority to decide on the establishment, dissolution, reorganization, and restructuring of subordinate public service organizations according to the provisions of the law.
- The organizational structure includes 24 units: Standardization Department, Metrology Department, Conformity Assessment and Compliance Department, Financial Planning Department, International Cooperation Department, Cadre Organization Department, Inspectorate, Office, Product Quality Management Bureau, Vietnam Institute for Standardization and Quality, Vietnam Metrology Institute, Technical Standards and Metrology Quality Center 1-4, Conformity Certification Center, Vietnam Productivity Center, Standardization and Metrology Quality Vocational Training Center, Standardization and Metrology Quality Information Center, Small and Medium Enterprise Development Support Center 1-2, Vietnam-Germany Technology Training and Transfer Center, Standardization and Metrology Quality Magazine, National Notification and Inquiry Office on Standardization and Metrology Quality.
- Units from Clause 1 to Clause 9 are administrative organizations assisting the Director in performing state management functions; units from Clause 10 to Clause 24 are public service organizations serving state management.
🌐 本文件的社会影响
- Positive impact: Improving the effectiveness of state management through the reorganization of the organizational structure.
- Negative impact: It may cause initial costs for the organizational transition process.
❓ 常见问题
When does this Decision take effect?
This Decision takes effect from October 15, 2011.
What rights does the Director have regarding subordinate public service organizations?
The Director has the right to decide on the establishment, dissolution, reorganization, and restructuring of subordinate public service organizations of the General Department of Standardization, Metrology, and Quality Control according to the provisions of the law.
What new organizational units are included in the new organizational structure?
The organizational structure includes 24 units: Standardization Department, Metrology Department, Conformity Assessment and Compliance Department, Financial Planning Department, International Cooperation Department, Cadre Organization Department, Inspectorate, Office, Product Quality Management Bureau, Vietnam Institute for Standardization and Quality, Vietnam Metrology Institute, Technical Standards and Metrology Quality Center 1-4, Conformity Certification Center, Vietnam Productivity Center, Standardization and Metrology Quality Vocational Training Center, Standardization and Metrology Quality Information Center, Small and Medium Enterprise Development Support Center 1-2, Vietnam-Germany Technology Training and Transfer Center, Standardization and Metrology Quality Magazine, National Notification and Inquiry Office on Standardization and Metrology Quality.
What role do organizations from Clause 1 to Clause 9 play?
Organizations from Clause 1 to Clause 9 are administrative organizations assisting the Director in performing state management functions.
What role do organizations from Clause 10 to Clause 24 play?
Organizations from Clause 10 to Clause 24 are public service organizations serving state management.
全文
Pursuant to …;
Amending and supplementing Decision No. 104/2009/QĐ-TTg dated August 12, 2009 of the Government on the functions, tasks, powers, and organizational structure of the Standard Metrology Quality Control General Department under the Ministry of Science and Technology
Pursuant to the Weights and Measures Ordinance dated October 6, 1999;
Pursuant to the Decree No. 178/2007/NĐ-CP dated December 3, 2007 of the Government on the functions, tasks, powers, and organizational structure of Ministries and ministerial-level agencies;
______________________
PRIME MINISTER
Pursuant to the Law on Organization of the Government dated December 25, 2001;
Pursuant to the Law on Standards and Technical Regulations dated June 29, 2006;
Pursuant to the Law on Product Quality and Commodities dated November 21, 2007;
Considering the proposal of the Minister of Science and Technology,
Amending and supplementing Article 3 of Decision No. 104/2009/QĐ-TTg dated August 12, 2009 of the Prime Minister on the functions, tasks, powers, and organizational structure of the Standard Metrology Quality Control General Department under the Ministry of Science and Technology as follows:
Pursuant to Decree No. 28/2008/NĐ-CP dated March 14, 2008, promulgated by the Government stipulating the functions, tasks, powers, and organizational structure of the Ministry of Science and Technology;
. Organizational Structure
DECISION:
Article 1. 4. Planning and Finance Department.
"Article 312. Technical Standards Metrology Quality Control Center No. 1.
1. Standards Division.
2. Measurement Division.
3. Conformity Assessment and Compliance Division.
13. Technical Standards Metrology Quality Control Center No. 2.
5. International Cooperation Department;
6. Organization and Cadre Department.
7. Inspection.
8. Office.
9. Product and Commodity Quality Management Bureau (abbreviated as GS1 VietNam).
10. Vietnam Institute of Standards and Quality;
11. Vietnam Institute of Metrology;
14. Technical Standards Metrology Quality Control Center No. 3.
15. Technical Standards Metrology Quality Control Center No. 4.
16. Conformity Certification Center.
17. Vietnam Productivity Center.
The organizations from Clause 1 to Clause 9 of this Article are administrative organizations assisting the Director-General in performing state management functions; the organizations from Clause 10 to Clause 24 of this Article are public service organizations serving state management.
The Minister of Science and Technology decides to establish, dissolve, reorganize, and restructure public service organizations under the Standard Metrology Quality Control General Department in accordance with the provisions of the law.
18. Training Center for Standards, Metrology, and Quality;
19. Information Center for Standards, Metrology, and Quality;
20. Small and Medium Enterprise Support Center 1;
21. Small and Medium Enterprise Support Center 2;
22. Vietnam-Germany Training and Technology Transfer Center;
23. Journal of Standards, Metrology, and Quality;
24. National Notification and Inquiry Office for Standards, Metrology, and Quality;
This Decision takes effect from October 15, 2011.
The Minister of Science and Technology, Ministers, Heads of ministerial-level agencies, Heads of government-affiliated agencies, Chairpersons of provincial People's Committees, municipal People's Committees directly under the central government, and the Director-General of the Standard Metrology Quality Control General Department are responsible for implementing this Decision.
Article 2. Effectiveness
This Decision shall take effect from October 15, 2011.
Article 3. Responsibility for Implementation
The Minister of Science and Technology, the Ministers, Heads of ministerial-level agencies, Heads of government-affiliated agencies, Chairpersons of provincial People's Committees under central cities, and the Director of the Standards, Measurement, and Quality Control General Department are responsible for implementing this Decision.
原始文件（PDF）
关系图
点击文件即可打开。红色边框＝改变效力的关系。
译本
本文件提供以下语言版本：