Decision No. 60/1999/QĐ-BCN of the Ministry of Industry issuing temporary technical requirements for two-wheel motorbike assembly production lines of type IKD, applicable to enterprises with motorbike assembly lines of type IKD.
Đối tượng áp dụng
Enterprises with two-wheel motorbike assembly production lines of type IKD.
Các điểm cốt lõi
- Enterprises with motorbike assembly lines of type IKD → must comply with the technical requirements stipulated in the Provision on General Technical Requirements for Two-Wheel Motorbike Assembly Production Lines of Type IKD.
- This decision takes effect from the date of issuance.
🌐 Tác động xã hội từ văn bản này
- Positive impact: Ensuring product quality, enhancing the reputation of enterprises.
- Negative impact: May increase investment and operational costs of assembly lines for enterprises.
❓ Câu hỏi thường gặp
To which types of motorbikes does this decision apply?
The decision applies to two-wheel motorbikes of type IKD.
What specific technical requirements must enterprises comply with?
Enterprises must comply with the technical requirements stipulated in the Provision on General Technical Requirements for Two-Wheel Motorbike Assembly Production Lines of Type IKD, but the details are not specified in this decision.
When does this decision take effect?
This decision takes effect from the date of issuance.
What procedures must enterprises undertake to comply with this regulation?
Specific information about the procedures is not provided in this decision, but enterprises need to ensure compliance with the stipulated technical requirements.
How does this decision affect the production costs of enterprises?
It may increase investment and operational costs of assembly lines for enterprises, but the extent is not specified in this decision.
Toàn văn
Pursuant to …;
Issuing temporary regulations on general technical requirements
for two-wheeled motorbike assembly production lines of the IKD type
________________
THE MINISTER OF INDUSTRY
Pursuant to the Government Decree No. 74/CP dated November 1, 1995 on the functions, tasks, powers, and organizational structure of the Ministry of Industry;
Based on the guidance of the Prime Minister in Official Letter No. 631/CP-KTTH dated June 19, 1999 regarding the situation of production and demand for motorbikes;
On the basis of the unified opinions of the Ministry of Science, Technology and Environment, the Ministry of Transport, and the Ministry of Commerce;
At the proposal of the Director of the Department of Technology Management and Product Quality and the Director of the Department of Planning and Investment.
DECISION:
Article 1. Attached to this Decision are "Regulations on General Technical Requirements for Two-Wheeled Motorbike Assembly Production Lines of the IKD Type".
Article 2. These regulations shall take effect from the date of signing.
The Head of the Ministry's Office, the Inspector General of the Ministry, the Heads of Departments, the Directors of specialized state management agencies under the Ministry, and enterprises with IKD-type motorcycle assembly lines are responsible for implementing this Decision./.
Tải văn bản
Văn bản này đang được cập nhật văn bản gốc, vui lòng xem nội dung toàn văn và kiểm tra lại sau.
Bản đồ quan hệ
Bấm vào một văn bản để mở. Viền đỏ = quan hệ làm thay đổi hiệu lực.
Bản dịch
Văn bản này có sẵn ở các ngôn ngữ sau: