Decision No. 6603/2009/QD-BCT on approving the laboratory to conduct testing for formaldehyde content and aromatic amines released from azo dyes under reduction conditions in textile products.

Decision No. 6603/2009/QD-BCT of the Ministry of Industry and Trade approves the Technical Standard Measurement Quality Center 1 to conduct testing for formaldehyde content and aromatic amines from azo dyes in textile products. This decision applies to the Technical Standard Measurement Quality Center 1 under the General Department of Standardization, Measurement, and Quality Control.

Số hiệu6603/2009/QĐ-BCT
Loại văn bảnDecision
Cơ quan ban hànhMinistry of Industry and Trade
Người kýĐỗ Hữu Hào — Thứ trưởng
Cập nhật27/06/2026
Lĩnh vựcUncategorized
Ngày ban hành28/12/2009
Ngày áp dụng28/12/2009
Ngày hết hiệu lực
Tình trạngIn effect
✦ Tóm lược thông minh

Decision No. 6603/2009/QD-BCT of the Ministry of Industry and Trade approves the Technical Standard Measurement Quality Center 1 to conduct testing for formaldehyde content and aromatic amines from azo dyes in textile products. This decision applies to the Technical Standard Measurement Quality Center 1 under the General Department of Standardization, Measurement, and Quality Control.

Đối tượng áp dụng

Technical Standard Measurement Quality Center 1, General Department of Standardization, Measurement, and Quality Control

Các điểm cốt lõi

  • The Technical Standard Measurement Quality Center 1 is permitted to conduct testing for formaldehyde content and aromatic amines from azo dyes in textile products.
  • The center is responsible for complying with state regulations in the field of conformity assessment.

🌐 Tác động xã hội từ văn bản này

  • Positive impact: Helps ensure the quality of textile products and protect consumer health.
  • Negative impact: Business costs may increase due to compliance with testing requirements.

❓ Câu hỏi thường gặp

What does the Technical Standard Measurement Quality Center 1 carry out?

The Technical Standard Measurement Quality Center 1 is permitted to conduct testing for formaldehyde content and aromatic amines from azo dyes in textile products.

To whom does this decision apply?

This decision applies to the Technical Standard Measurement Quality Center 1 under the General Department of Standardization, Measurement, and Quality Control.

What is the responsibility of the center?

The Technical Standard Measurement Quality Center 1 is responsible for fully complying with state regulations in the field of designated conformity assessment.

How does the Technical Standard Measurement Quality Center 1 conduct testing?

Specific conditions regarding the method of conducting testing are not mentioned in the document; it is known that the center is responsible for complying with state regulations.

Toàn văn

MINISTRY OF INDUSTRY AND TRADE

SOCIALIST REPUBLIC OF VIET NAM
Independence – Freedom – Happiness

Number: 6603/2009/QD-BCT
Hanoi, December 28, 2009

Pursuant to …;

Regarding the approval of the laboratory to conduct testing for the determination of formaldehyde content and aromatic amines that can be released from azo dyes under reduction conditions on textile products FORMALDEHYDE, aromatic amines that can be released from azo dyes under reduction conditions on textile products

____________________

 

THE MINISTER OF INDUSTRY AND TRADE

Pursuant to Decree No. 189/2007/ND-CP dated December 27, 2007, issued by the Government, detailing the functions, tasks, powers, and organizational structure of the Ministry of Industry and Trade;

Pursuant to Decree No. 132/2008/NĐ-CP dated December 31, 2008 of the Government detailing a number of provisions of the Law on Product Quality;

Pursuant to Circular No. 32/2009/TT-BCT dated November 5, 2009 of the Ministry of Industry and Trade temporarily regulating permissible limits for formaldehyde content and aromatic amines that can be released from azo dyes under reduction conditions on textile products;

Considering the application file number 584/KT1-TTr dated December 17, 2009 of the Technical Standard Metrology Quality Control Center 1, General Department of Standardization, Measurement, and Quality Control;

Pursuant to the proposal of the Director of the Science and Technology Department,

DECISION:

Article 1. Approves the Technical Standard Metrology Quality Control Center 1, General Department of Standardization, Measurement, and Quality Control to be permitted to conduct testing for the determination of formaldehyde content and aromatic amines that can be released from azo dyes under reduction conditions on textile products.

Article 2. The Technical Standard Metrology Quality Control Center 1, General Department of Standardization, Measurement, and Quality Control shall fulfill all state regulations in the field of conformity assessment as designated.

Article 3. The Director of the Ministry's Office, the Head of the Science and Technology Department, the Director of the Market Management Agency, the Director of the Technical Standard Metrology Quality Control Center 3, the Heads of related agencies and organizations are responsible for implementing this Decision.

DEPUTY MINISTER
DEPUTY MINISTER
(Signed)
Do Huu Hao
Văn bản này đang được cập nhật văn bản gốc, vui lòng xem nội dung toàn văn và kiểm tra lại sau.