Decision No. 05/1999/QD-BCN of the Ministry of Industry issued 4 industry standards on paper and cardboard products applicable to domestic manufacturing enterprises. These standards took effect from February 1, 1999.
适用范围
Domestic manufacturing enterprises producing paper and cardboard
要点
- Domestic manufacturing enterprises producing paper and cardboard → shall apply 4 industry standards on paper and cardboard products which became effective from February 1, 1999.
🌐 本文件的社会影响
- Positive impact: Ensuring the quality of paper and cardboard products, enhancing business efficiency for enterprises.
- Negative impact: May cause difficulties in transitioning to the new industry standards.
❓ 常见问题
When were these industry standards issued?
These industry standards were issued on February 1, 1999 pursuant to Decision No. 05/1999/QD-BCN.
Who is responsible for guiding the implementation of this decision?
The Director of the Department of Technology Management and Product Quality is responsible for guiding the implementation of this Decision.
To which types of products do these industry standards apply?
These industry standards apply to paper, surface layers of corrugated cardboard; paper used as the corrugated layer of corrugated cardboard; middle flat layers of corrugated cardboard and duplex cardboard.
When does this decision take effect?
This decision takes effect from February 1, 1999.
What should paper manufacturing enterprises do to comply with this decision?
Paper manufacturing enterprises must implement the industry standards issued under Decision No. 05/1999/QD-BCN.
全文
DECISION
ISSUING 04 INDUSTRY STANDARDS ON PAPER AND CARDBOARD PRODUCTS
THE MINISTER OF INDUSTRY
Pursuant to Decree No. 74/CP dated November 1, 1995 of the Government on the functions, tasks, powers, and organizational structure of the Ministry of Industry;
BASED ON THE DECREE NO. 141/HDBT OF AUGUST 24, 1982 OF THE STATE COUNCIL (NOW THE GOVERNMENT) ON THE REGULATIONS FOR STANDARDIZATION WORK;
BASED ON THE DECREE NO. 86/CP OF DECEMBER 8, 1995 OF THE GOVERNMENT ON THE ASSIGNMENT OF RESPONSIBILITIES FOR NATIONAL MANAGEMENT OF PRODUCT QUALITY;
At the proposal of the Director of the Department of Technology Management and Product Quality,
DECISION:
Article 1. ATTACHED TO THIS DECISION ARE 04 INDUSTRY STANDARDS ON PAPER AND CARDBOARD PRODUCTS PRODUCED AND CONSUMED DOMESTICALLY, INCLUDING:
24TCN72-99 CARDBOARD FACE LAYER OF WAVE CARDBOARD;
24TCN73-99 PAPER USED AS WAVE IN CARDBOARD;
24TCN74-99 CARDBOARD CENTER FLAT LAYER OF WAVE CARDBOARD;
24TCN75-99 DUPLEX CARDBOARD;
THESE STANDARDS ARE ISSUED IN THE FORM OF GUIDELINES AND ENCOURAGEMENTS FOR APPLICATION AND SHALL TAKE EFFECT FROM FEBRUARY 1, 1999.
Article 2. THE HEAD OF THE TECHNOLOGY AND PRODUCT QUALITY MANAGEMENT DEPARTMENT IS RESPONSIBLE FOR GUIDING THE IMPLEMENTATION OF THIS DECISION.
Article 3. THE DIRECTOR OF THE MINISTRY'S OFFICE, HEADS OF RELEVANT DEPARTMENTS, CHAIRMAN OF THE VIETNAM PAPER ASSOCIATION, GENERAL MANAGER OF THE VIETNAM PAPER CORPORATION, AND ALL PAPER PRODUCING ENTERPRISES ACROSS THE COUNTRY ARE RESPONSIBLE FOR ENFORCING THIS DECISION./.
关系图
点击文件即可打开。红色边框＝改变效力的关系。