This Decision promulgates industry standards on measurement technology, machine safety, metallic materials, surgical and orthopedic instruments. It applies to the Ministry of Industry and related units.
Scope of application
The Ministry of Industry and related functional units
Key points
- The Minister of Industry issues industry standards from TCN 878-2000 to TCN 915-2000.
- These standards apply to various fields such as transportation equipment, internal combustion engines, hardness testing machines, slides, surgical implants, and orthopedic tools.
- These standards specify measurement technology, machine safety, metallic material characteristics, and requirements for processing, dimensions, and testing.
- Application conditions are not specified in the text.
- No sanctions or penalty levels are mentioned.
🌐 Social impact of this document
- Positive impact: Standardizing measurement technology and machine safety improves product quality and protects consumers.
- Negative impact: Businesses require time and resources to implement new standards.
❓ Frequently asked questions
To which sectors does this industry standard apply?
This industry standard applies to various fields such as transportation equipment, internal combustion engines, hardness testing machines, slides, surgical implants, and orthopedic tools.
How many industry standards did the Minister of Industry issue?
The Minister of Industry issued 38 industry standards from TCN 878-2000 to TCN 915-2000.
How does this standard specify measurement technology?
This standard specifies measurement technology for impact tests, rain tests, humidity tests, water spray tests, and parts of automobiles.
Full text
|
MINISTRY OF INDUSTRY |
SOCIALIST REPUBLIC OF VIETNAM |
|
Number: 11/2000/QĐ-BCN |
Hanoi, March 9, 2000 |
Pursuant to …;
Regarding the issuance of industry standards
THE MINISTER OF INDUSTRY
Pursuant to Decree No. 74/CP dated November 1, 1995 of the Government on the functions, tasks, powers, and organizational structure of the Ministry of Industry;
Pursuant to the Quality Goods Ordinance dated December 27, 1990;
Considering the proposal of the Director of the Department of Technology Management and Product Quality;
DECISION
Article 1: Now promulgates the following industry standards with the following numbers:
from 16 TCN 878-2000 to 16 TCN 915-2000;
As attached to this Decision.
Article 2: The Head of the Ministry's Office, Directors of relevant Departments, and related units shall be responsible for implementing this Decision./.
| MINISTER OF INDUSTRY AND TRADE DEPUTY MINISTER (signed) Le Quoc Khanh |
|
|
ANNEX
(Attached to Decision No. 11/2000/QĐ-BCN, dated March 9, 2000)
|
No. |
Standard Name |
Standard Number |
|
1 |
2 |
3 |
|
1 |
Road transport vehicles. Dimensions of two-wheeled motorcycles and motorbikes. Terminology and definitions |
16 TCN 878-2000 |
|
2 |
Road transport vehicles. Impact test measurement techniques. Measuring instruments |
16 TCN 879-2000 |
|
3 |
Road transport vehicles. Motorcycles. Indicators and signal symbols |
16 TCN 880-2000 |
|
4 |
Road transport vehicles. High and low temperature testing methods for automobile parts |
16 TCN 881-2000 |
|
5 |
Road transport vehicles. Brake lining. Surface and material damage evaluation after testing |
16 TCN 882-2000 |
|
6 |
Road transport vehicles. Rain, moisture, water spray, and dust testing methods for automobile parts |
16 TCN 883-2000 |
|
7 |
Internal combustion engines. Piston ring. Material characteristics |
16 TCN 884-2000 |
|
8 |
Diesel engine. Fuel injection pump. Cone for shaft end and flange |
16 TCN 885-2000 |
|
9 |
Machine safety. Emergency stop. Design principles |
16 TCN 886-2000 |
|
10 |
Machine safety. Minimum clearance to prevent crushing injuries to body parts |
16 TCN 887-2000 |
|
11 |
Shore hardness tester. Technical features |
16 TCN 888-2000 |
|
12 |
Tensile tester. Technical features |
16 TCN 889-2000 |
|
13 |
Rockwell hardness and surface Rockwell hardness tester. Technical features |
16 TCN 890-2000 |
|
14 |
Brinell hardness tester. Technical features |
16 TCN 891-2000 |
|
15 |
Foundry tools. Common push head sleeve |
16 TCN 892-2000 |
|
16 |
Foundry tools. Centering sleeve |
16 TCN 893-2000 |
|
17 |
Foundry tools. Push head pin |
16 TCN 894-2000 |
|
18 |
Foundry tools. Casting base. Positioning detail |
16 TCN 895-2000 |
|
19 |
Sliding bearing. Basic symbols |
16 TCN 896-2000 |
|
20 |
Sliding bearing. Metal material compression testing |
16 TCN 897-2000 |
|
21 |
Sliding bearing. Metal material corrosion resistance testing under static conditions using lubricating oil |
16 TCN 898-2000 |
|
22 |
Sliding bearing. Quality assurance. Test sample types. Definitions, applications, and tests |
16 TCN 899-2000 |
|
23 |
Sliding bearing. Quality characteristics. Statistical process control (SPC) inspection |
16 TCN 900-2000 |
|
24 |
Standard tooth profile of basic gear |
16 TCN 901-2000 |
|
25 |
Practical inspection rules for gear teeth surfaces |
16 TCN 902-2000 |
|
26 |
Practical inspection rules for mixed helix deviation, helix angle deviation, tooth thickness, and flank clearance |
16 TCN 903-2000 |
|
27 |
Surface roughness. Values and general rules for determining surface roughness parameters |
16 TCN 904-2000 |
|
28 |
Agricultural tractors. Hay harvesters. Testing methods |
16 TCN 905-2000 |
|
29 |
Agricultural tractors and machinery. Hay harvesters. Terminology |
16 TCN 906-2000 |
|
30 |
Agricultural tractors and machinery. Signal transmission coupling. Technical features |
16 TCN 907-2000 |
|
31 |
Agricultural tractors and machinery. Hay harvesters. Rotating cutter blade type A |
16 TCN 908-2000 |
|
32 |
Agricultural tractors and machinery. Hay harvesters. Rotating cutter blade type B |
16 TCN 909-2000 |
|
33 |
Surgical implants. Metallic materials. Cobalt-Nickel-Chromium-Molybdenum alloy - pressure processing |
16 TCN 910-2000 |
|
34 |
Surgical implants. Metal bone screws. Hexagonal socket head cap screw with non-symmetric thread. Dimensions |
16 TCN 911-2000 |
|
35 |
Bone fixation devices. Technical features of symmetrically threaded screws with conical seats |
16 TCN 912-2000 |
|
36 |
Surgical instruments. Metallic materials. Stainless steel |
16 TCN 913-2000 |
|
37 |
Orthopedic instruments. Wrench heads. Wrenches for hexagonal socket screws |
16 TCN 914-2000 |
|
38 |
Orthopedic instruments. Wrench heads. Wrenches for single-slot, cross-slot, and dove-tail screws |
16 TCN 915-2000 |
Relations map
Click a document to open. A red border = a relation that changes validity.
Translations
This document is available in the following languages: